Panasonic WV-NP1004 ユーザーズマニュアル
58
Adjust white balance finely
After adjusting white balance using the auto tracking white balance (ATW) function or the auto white balance control
(AWC) function (
(AWC) function (
☞ page 50), manually adjust white balance finely.
Step 1
Press the [SET] button after selecting any of "ATW1",
"ATW2" and "AWC" for "WHITE BAL" on the "CAMERA
SETUP" page.
"ATW2" and "AWC" for "WHITE BAL" on the "CAMERA
SETUP" page.
→ The fine adjustment window will be displayed.
Step 2
Move the cursor onto "R" or "B" and adjust the level
using the [Left] and [Right] buttons. "R" indicates red
and "B" indicates blue. When the "I" cursor is moved to
the "+" direction, red/blue gain will be incremented
respectively. When the "I" cursor is moved to the "–"
direction, red/blue gain will be decremented respective-
ly.
using the [Left] and [Right] buttons. "R" indicates red
and "B" indicates blue. When the "I" cursor is moved to
the "+" direction, red/blue gain will be incremented
respectively. When the "I" cursor is moved to the "–"
direction, red/blue gain will be decremented respective-
ly.
Note:
To reset to the default settings, press the [Left] and
[Right] buttons simultaneously for 2 seconds or
more.
[Right] buttons simultaneously for 2 seconds or
more.
**ATW1**
R ...
R ...
|
...128
- +
B ...
|
...128
- +
RET TOP END