Panasonic AXJ4 ユーザーズマニュアル
Interf
ace connectors
AXJ4
SPECIFICATIONS
1. Characteristics
2. Material and surface treatment
Item
Specifications
Conditions
Electrical
characteristics
characteristics
Rated current
1.0A
Rated voltage
30V DC/AC
Contact resistance
Max. 50m
Ω
EIA-364-23
(Inductive resistance to wire is not included)
(Inductive resistance to wire is not included)
Insulation resistance
Min. 100M
Ω
EIA-364-21
Using 100V DC megger
Using 100V DC megger
Breakdown voltage
100V AC (Dielectric breakdown must not occur during a 1 min.
application)
application)
EIA-364-20
Detection current: 1mA
Detection current: 1mA
Electrostatic capacity
Max. 2pF
EIA-364-30
(Measure it between the adjacent terminals of the unmated
connector at a frequency of 1 kHz.)
(Measure it between the adjacent terminals of the unmated
connector at a frequency of 1 kHz.)
Mechanical
characteristics
characteristics
Composite insertion
force (initial)
force (initial)
Max. 35N
{3.57kgf}
{3.57kgf}
EIA-364-13
Insert and remove a plug at a speed of 12.5 mm/min.
Insert and remove a plug at a speed of 12.5 mm/min.
Composite removal
force (initial)
force (initial)
Min. 7N {0.714kgf}
Environmental
characteristics
characteristics
Ambient temperature
–55
°C to 85°C
No freezing or condensation in low temperatures
Storage temperature
–55
°C to 85°C (–40°C to 50°C for packaging materials)
No freezing or condensation in low temperatures
Vibration resistance
Discontinuity: Max. 1
µs
Contact resistance: Max. 50m
Ω
Appearance: No abnormality
EIA-364-28
Apply vibration in three directions including the mating axis
that are perpendicular to one another for 15 minutes
respectively with a 100 mA DC current applied.
Cord length: 100mm Fix the cord end.
Apply vibration in three directions including the mating axis
that are perpendicular to one another for 15 minutes
respectively with a 100 mA DC current applied.
Cord length: 100mm Fix the cord end.
Impact resistance
Discontinuity: Max. 1
µs
Contact resistance: Max. 50m
Ω
Appearance: No abnormality
EIA-364-27
Acceleration: 294m/s
Acceleration: 294m/s
2
(30G)
Duration: 11 ms,
Application directions: 6 surfaces (X, Y, and Z directions)
Number of applications: 3 times respectively (Total: 18 times)
Cord length: 100mm Fix the cord end.
Application directions: 6 surfaces (X, Y, and Z directions)
Number of applications: 3 times respectively (Total: 18 times)
Cord length: 100mm Fix the cord end.
Heat resistance
(mated)
(mated)
250 hours
Contact resistance: Max. 50m
Contact resistance: Max. 50m
Ω
Withstand voltage: 100V AC dielectric breakdown must not
occur during a one-minute application.
Insulation resistance: Min. 100M
occur during a one-minute application.
Insulation resistance: Min. 100M
Ω
Appearance: No abnormality
EIA-364-17
Temperature: 85
Temperature: 85
±2°C
Low temperature
resistance (mated)
resistance (mated)
96 hours
Contact resistance: Max. 50m
Contact resistance: Max. 50m
Ω
Withstand voltage: 100V AC dielectric breakdown must not
occur during a one-minute application.
Insulation resistance: Min. 100M
occur during a one-minute application.
Insulation resistance: Min. 100M
Ω
Appearance: No abnormality
Temperature: –55
±2°C
Humidity resistance
(mated)
(mated)
7 cycles
Contact resistance: Max. 50m
Contact resistance: Max. 50m
Ω
Withstand voltage: 100V AC dielectric breakdown must not
occur during a one-minute application.
Insulation resistance: Min. 100M
occur during a one-minute application.
Insulation resistance: Min. 100M
Ω
Appearance: No abnormality
EIA-364-31 Method III
Temperature cycle test
(mated)
(mated)
10 cycles
Contact resistance: Max. 50m
Contact resistance: Max. 50m
Ω
Withstand voltage: 100V AC dielectric breakdown must not
occur during a one-minute application.
Insulation resistance: Min. 100M
occur during a one-minute application.
Insulation resistance: Min. 100M
Ω
Appearance: No abnormality
Sequence
1. –55
1. –55
±3°C, 30 minutes
2. ~, Max. 5 minutes
3. 85
3. 85
±2°C, 30 minutes
4. ~, Max. 5 minutes
Saltwater spray
resistance (mated)
resistance (mated)
48 hours
Contact resistance: Max. 100m
Contact resistance: Max. 100m
Ω
Appearance: No abnormality
Bath temperature: 35
±2°C
Saltwater concentration: 5
±1%
Wash the connector with water at room temperature after the
test, and then dry it at room temperature.
test, and then dry it at room temperature.
Hydrogen sulfide
96 hours
Contact resistance: Max. 100m
Contact resistance: Max. 100m
Ω
Appearance: No abnormality
Temperature :40
±2°C
Humidity: 75 to 80%
Gas concentration: 3
Gas concentration: 3
±1ppm
Soldering
temperature
resistance
temperature
resistance
Reflow soldering
Peak temperature: Max. 260
°C
Manual soldering
300
±10°C: Max. 5 s
350
±10°C: Max. 3 s
Part name
Material
Surface treatment
Resin-molding portion
Heat-resistant resin (UL94V-0)
—
Metal parts
Contact
Copper alloy
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Sn plating on surface
Terminal portion: Ni plating on base, Sn plating on surface
Shell
Copper alloy
Ni plating on base, Sn plating on surface
Pickup tape
Heat-resistant resin
—
http://www.mew.co.jp/ac/e/
Matsushita Electric Works, Ltd.