Perle Systems 5500152-23 ユーザーズマニュアル
UltraPort Serial Adaptors User Guide
Page 131
The print.spd configuration file
For each port, transparent printing is controlled by an entry in the print.spd file. The
print.spd file is found in the /etc/ directory on your system. The entry for each port includes
definitions of the terminal type, transparent print throughput rate, device name. The content
of the print.spd file is normally controlled automatically by either the Port Configuration utility
(SCO OpenServer). A sample entry from a typical print.spd file is shown in the next example.
print.spd file is found in the /etc/ directory on your system. The entry for each port includes
definitions of the terminal type, transparent print throughput rate, device name. The content
of the print.spd file is normally controlled automatically by either the Port Configuration utility
(SCO OpenServer). A sample entry from a typical print.spd file is shown in the next example.
100 unknown ttyz1 -ixany -ixon
Maximum number of characters per second
throughput for transparent printing
throughput for transparent printing
Device name
Terminal type of terminal to which your printer is
attached defined in the printcap.spd file.
attached defined in the printcap.spd file.
Enables flow control for Transparent printing.
Enables sending of data on receipt of the next character
(when flow control is enabled on the transparent print port).
(when flow control is enabled on the transparent print port).