Netgear WN111v2 プリント

)NSTALLATION

These setup instructions assume that you will connect to an access point or wireless router.

Estimated completion time:10 minutes.

Insert the Resource CD. If the CD main page 
does not display, browse the files on the CD and 
double-click Autorun.exe.

1.

Click Install the Software. The Software 
Update Check screen displays. 

2.

NETGEAR recommends that you upgrade 
when new firmware is available. If you are 
connected to the Internet, click Check for Updates. If not, install from the CD.

The NETGEAR Smart Wizard Welcome screen displays.

3.

Follow the onscreen instructions to install the NETGEAR WN111v2 software. 

4.

When the NETGEAR Smart Wizard Installation Complete screen displays, click 
Next.

Connect the wireless adapter to a USB port on your 
computer:

1.

For best results, put the wireless adapter at least 4 
feet (1 meter) away from your router. 

2.

Attach the wireless USB adapter directly to a USB 
port on your computer, or use the USB cable (see 
“Using the USB Cable and Cradle” on the other 
side of this document.

1.

Depending on which Windows operating system you are using, do one of the 
following:

•

Windows Vista. If you are using a Windows Vista computer, the adapter and 
driver are automatically added.

Note: If a message that Windows Vista cannot verify the publisher of this driver 
displays, click Install this driver software anyway.

•

Windows XP or Windows 2000 SP4. If you are using a Windows XP or 
Windows 2000 SP4 computer, follow the onscreen instructions for the Found 
New Hardware Wizard.

Note: For Windows XP, if a Windows logo testing message appears, click 
Continue Anyway. 

2.

When the NETGEAR Smart Wizard screen returns, click Next to proceed. 

Windows XP or Vista users can set up the 
wireless adapter either with the NETGEAR 
Smart Wizard (recommended) or the Windows 
configuration utilities. 

For Windows configuration utilities, see the 
Windows documentation or the NETGEAR 
application note at: http://
documentation.netgear.com/reference/enu/
winzerocfg/index.htm.

The NETGEAR Smart Wizard reveals more information about each network and 
makes it easier to troubleshoot network connection problems.

3.

Click Next to accept the Smart Wizard.

You are prompted to let the wizard help you 
connect to a network (recommended).

4.

Click Next to proceed. 

The next screen that displays depends on whether there is a wireless router or access point 
at your location that supports Push 'N' Connect (Wi-Fi Protected Setup [WPS]). 

1.

Follow the instructions on the Connecting to your wireless network screen:

•

If there are no WPS networks, select a wireless network from the drop-down list, 
and the wizard records your choice.

Note: Hidden networks do not broadcast the Network Name (SSID). These 
networks are in the drop-down list, but the Network Name (SSID) is blank.

If the network uses security, then the Smart Wizard detects it. 

•

If you want to use WPS to create a secure connection, leave the radio box 
checked and click Next to continue; otherwise, select the No radio box and click 
Next to continue.

WPS allows you to click a button or create a PIN number to securely connect to a 
wireless router or access point. Both the wireless adapter and the router or access 
point must support WPS. For more information about WPS, see the NETGEAR 
RangeMax™ Wireless-N USB 2.0 Adapter WN111v2 User Manual on the 
Resource CD.

2.

Follow the Smart Wizard steps to connect to a network and to save a Profile.

3.

After you have reviewed the settings, click Finish.

The WN111v2 icon 

 appears in the system tray and on the desktop. The Smart 

Wizard Settings tab also displays and the adapter initiates your wireless connection. It 
can take up to a minute to complete your connection. 

The wireless networks in your area

One or more wireless networks with WPS
are in your area.

do not support WPS.

Hidden Network