Netgear FS526Tv2 ユーザーズマニュアル
Installation
14
ProSAFE 26-Port Fast Ethernet Smart Switch FS526Tv2
Step 3: Check the Installation
Before you apply power to the switch, do the following:
•
Inspect the equipment thoroughly.
•
Verify that all cables are installed correctly.
•
Check cable routing to make sure that cables are not damaged or creating a safety
hazard.
hazard.
•
Ensure that all equipment is mounted properly and securely.
Step 4: Connect Devices to the Switch
The switch supports Auto MDI/MIDX technology, which allows you to attach devices using
either straight-through or crossover cables.
either straight-through or crossover cables.
Note:
Ethernet specifications limit the cable length between the switch and
an attached device to 100 meters (328 feet).
an attached device to 100 meters (328 feet).
Figure 6. Connecting devices to ports on the front panel
To connect a computer to an RJ-45 network port on the front panel of the switch:
1.
Connect a Category 5 cable that is terminated with RJ-45 connectors to a computer.
2.
Connect the RJ-45 connector on the other side of the cable to an RJ-45 network port on the
front panel of the switch.
front panel of the switch.