Verizon 7500 ユーザーズマニュアル

 

 

 

 
 

030-300536 Rev. A 

140 

     August 2007 

User Name 

Default = admin 
The name used for the Remote Administration session. The only valid characters are (a-
z, A-Z, 0-9). The user name must be at least 6 characters and must not exceed 12 
characters long. 

Password 

The password used for the remote administration session. Do not use spaces or double-
quotes in the password field. The user name must be at least 6 characters and must not 
exceed 12 characters long. 

Timeout 

Default = 20 minutes 
The interval (in minutes) after which the remote access will disconnect, if it is idle. 

Disable Timeout 

Default = deactivated 
To activate the Disable Timeout feature, click this box (a check mark will appear). 
Clear the box to deactivate this feature. 

Enable Remote Access  Default = deactivated 

Click this box (a check mark will appear) to activate Enable Remote Access. 
Clear the box to deactivate this feature. 

Remote URL 

Displays the URL for the remote access session. 

 
In the Advanced screen, click ALG.  This screen allows you to configure your Router so that it can be accessed 
remotely via a URL. Configure this feature to allow maintenance or troubleshooting for your Router. This page 
enables you to configure application-level gateway (ALG) services for your Gateway. Click on the box of each 
service that you want to enable (a check mark will appear in the box). After you have configured the desired 
settings, click Save to save the settings.  
 
Enabling an ALG service opens the IP ports associated with the corresponding service. For example, if you have an 
IPSec client running on a LAN-side PC attached to the TriLink, it is necessary to enable the IPSec ALG. Enabling 
IPSec opens the default ports used by IPSec, 500 and 1500 so that traffic to and from the IPSec client may pass through. 
 
NOTE: When the firewall level is set to “High,” some services may not be configurable.