Verizon 7500 ユーザーズマニュアル

 

 

 

 
 

030-300536 Rev. A 

35 

     August 2007 

 
To browse the Internet using your Router, you must confirm your DSL connection, set up your account profile, and 
establish a DHCP or PPP session with your Internet service provider (ISP). The procedures for configuring your 
Router’s connection settings are explained in this section. 
 
 

 
After you have logged on to the Router and changed your administrator password, as explained in section 8, the 
following home page will appear. Use this page to determine the status of your DSL and Internet connections. 
 
IMPORTANT: You must have active DSL service before the Router can synchronize with Verizon’s equipment.  
 
To determine if the Router has established a DSL link, do any of the following: 
 

•  In the My Modem panel of the Main page, view the DSL link field. If the status reads Not Connected, 

you do not have a DSL link. However, if DSL Link field displays Connected and the Speed (Down/Up) 
field displays numeric values, a DSL link has been established. The values displayed represent the 
transmission rates of your DSL signal, downstream and upstream. (You may need to wait a brief moment 
for the Router to report these values.) 

•  At the front of the Router, check to see if the Router’s DSL LED is solid green. Solid green indicates that 

the Router’s DSL connection has been established. (The DSL LED may flash while the connection is being 
established.) Please wait a brief moment for the Router to connect.