Omnitron Systems Technology 4380 プリント

The 4380 FlexPoint Wall-Mounting kit was designed
to attach one FlexPoint module to a wall, back-board or
other flat surface.  The 4380  kit includes the following
hardware:

(2)

“L” shaped brackets.

(4)

Flat head screws, 4-40, 1/4 inch.

(4)

Wall mounting screws

Before installing a FlexPoint unit, make sure to disconnect
it from its power adapter and to disconnect the power
adapter from the AC power outlet.

1. Align the screw threads of the FlexPoint unit with

the holes in the bracket.

2. Attach one “L” bracket on each side of the unit using

two 4-40 flat head screws enclosed with the kit.

3. The FlexPoint with the tab bracket should look as

in the picture below.

4. Attach unit to the desired surface using appropriate

screws (not provided).

5. Follow any installation instructions in the FlexPoint

User Installation guide.

If you encounter problems in installing or maintaining

this product, contact Omnitron Technical Support:

Phone:

(949) 250-6510

Fax:

(949) 250-6514

Address:

Omnitron Systems Technology, Inc.

140 Technology Drive, #500

Irvine, CA  92618  USA

Email:

support@omnitron-systems.com

URL:

www.omnitron-systems.com

         040-04380-001E   11/07