Omron CJ1W-CLK21-V1 ユーザーズマニュアル
184
Introduction
Section 6-1
For details on commands for CS/CJ-series PLCs, refer to the CS/CJ-series
Programmable Controllers Instructions Reference Manual (W340). For details
on commands for CVM1 and CV-series PLCs, refer to the FINS Commands
Reference Manual (W227). For details on commands for C200HX/HG/HE
PLCs, refer to 6-6 Commands and Responses for C200HX/HG/HE and
CQM1H-series PLCs. For details on commands for Controller Link Units, refer
to 6-5 Commands and Responses for Controller Link Units.
Programmable Controllers Instructions Reference Manual (W340). For details
on commands for CVM1 and CV-series PLCs, refer to the FINS Commands
Reference Manual (W227). For details on commands for C200HX/HG/HE
PLCs, refer to 6-6 Commands and Responses for C200HX/HG/HE and
CQM1H-series PLCs. For details on commands for Controller Link Units, refer
to 6-5 Commands and Responses for Controller Link Units.
6-1-3
Send/Receive Data Areas
The data areas that can be used as operands in the SEND and RECV instruc-
tions depend on the PLC, as shown in the following tables. Be sure to set the
operands so that the end of the data area is not exceeded.
tions depend on the PLC, as shown in the following tables. Be sure to set the
operands so that the end of the data area is not exceeded.
CS/CJ-series PLCs
Note
1.
Writing is not possible to words A000 through A447 in the Auxiliary Area.
2.
A maximum of thirteen banks can be used for Expansion DM. For details
on extended DM Area and the number of banks, refer to the operation
manual for the PLC model that is being used.
on extended DM Area and the number of banks, refer to the operation
manual for the PLC model that is being used.
File Memory
FILE NAME READ
2201
Yes
Yes
SINGLE FILE READ
2202
Yes
Yes
SINGLE FILE WRITE
2203
Yes
Yes
MEMORY CARD FORMAT
2204
Yes
Yes
FILE DELETE
2205
Yes
Yes
VOLUME LABEL CREATE/
DELETE
DELETE
2206
No
Yes
FILE COPY
2207
Yes
Yes
FILE NAME CHANGE
2208
Yes
Yes
FILE DATA CHECK
2209
No
Yes
MEMORY AREA FILE
TRANSFER
TRANSFER
220A
Yes
Yes
PARAMETER AREA FILE
TRANSFER
TRANSFER
220B
Yes
Yes
PROGRAM AREA FILE
TRANSFER
TRANSFER
220C
Yes
Yes
Forced set/reset
FORCED SET/RESET
2301
Yes
Yes
FORCED SET/RESET
CANCEL
CANCEL
2302
Yes
Yes
Type of command
Code
CS/
CJ
CVM1/
CV
Area
Range
CIO (IR etc.)
CIO 0000 to CIO 6143
Work Area (WR)
W000 to W511
Holding Area
HR000 to HR511
Auxiliary Area
AR000 to AR959 (See note 1.)
Timer
T0000 to T4095
Counter
C0000 to C4095
DM Area
DM00000 to DM32767
Extended DM Area
EM00000 to EM32767 (See note 2.)