Nortel Networks R2MFC ユーザーズマニュアル
84 Chapter 7 Command Line Interface (CLI)
NN40010-300
MFC directory
Table 25 includes the CLI commands for the configuration and control of MFC-R2 protocols. The
commands are accessed from the MFC directory.
commands are accessed from the MFC directory.
Table 25 MFC directory CLI commands (Sheet 1 of 3)
CLI command
Description
ICm <mfc_link>
<incoming_timer_type> <msec>
Sets and displays incoming call timers.
Where:
mfc_link is the number of required mfc/r2 links.
incoming_timer_type is one of the timers defined for incoming mfc call
mfc_link is the number of required mfc/r2 links.
incoming_timer_type is one of the timers defined for incoming mfc call
processing.
msec is the time interval in msec.
msec is the time interval in msec.
OGm <mfc_link>
<outgoing_timer_type> <msec>
Sets and displays outgoing call timers.
Where:
mfc_link is the number of required mfc/r2 links.
outgoing_timer_type is one of the timers defined for outgoing mfc call
mfc_link is the number of required mfc/r2 links.
outgoing_timer_type is one of the timers defined for outgoing mfc call
processing.
msec is the time interval in msec.
msec is the time interval in msec.
REgSign <mfc_link><rs_name>
Sets the register signaling
Where:
mfc_link is the number of the link, 0 or 1.
rs_name is the signaling type, 0 (MFC) or 1 (SMFC).
mfc_link is the number of the link, 0 or 1.
rs_name is the signaling type, 0 (MFC) or 1 (SMFC).
AniOption <mfc_link><flag>
Enables or disables the ANI option.
Where:
mfc_link is the number of the link, 0 or 1.
flag defines the ANI option as enabled (0) or disabled (1).
mfc_link is the number of the link, 0 or 1.
flag defines the ANI option as enabled (0) or disabled (1).
When disabled, ANI is not requested in incoming calls and not transmitted in
outgoing calls.
mfcINDia<flag>
Enables or disables the processing of the special MFC option for India.
Where:
flag defines the Special ANI digit option as enabled (0) or disabled (1).
flag defines the Special ANI digit option as enabled (0) or disabled (1).
When enabled, the prefix of one is expected on incoming calls and is
transmitted on outgoing calls.