Omron CJ1W-EIP21 ユーザーズマニュアル
306
Using the FTP Server Function
Section 11-3
11-3-3 FTP Tab
The CPU Bus Unit System Setup, which is set when using the FTP server
function, is shown in the CX-Programmer's Edit Parameters Dialog Box.
function, is shown in the CX-Programmer's Edit Parameters Dialog Box.
■
Settings
Setting
Details
Default value
Login
Set the login name to externally connect to
the EtherNet/IP Unit or built-in EtherNet/IP
port via FTP.
the EtherNet/IP Unit or built-in EtherNet/IP
port via FTP.
None
(CONFIDENTIAL is
used.)
used.)
Password
Set the password to externally connect to the
EtherNet/IP Unit or built-in EtherNet/IP port
via FTP.
EtherNet/IP Unit or built-in EtherNet/IP port
via FTP.
None
Port No.
FTP port number of the EtherNet/IP Unit or
built-in EtherNet/IP port.
built-in EtherNet/IP port.
This setting does not normally need to be
changed.
changed.
FTP uses two ports: a port for control and a
port for data transfer. Set the control port
only. The data transfer port uses the value
set for the control port –1.
port for data transfer. Set the control port
only. The data transfer port uses the value
set for the control port –1.
0
(21 is used.)