Nortel Networks Option 11C Mini ユーザーズマニュアル
Page 148 of 332
Chapter 12 — Installing the circuit cards
553-3021-209
Standard 3.00
April 2000
Refer to the Intelligent Peripheral Equipment Circuit Card Supplements for
full descriptions of country-specific IPE cards and their installation
procedures.
full descriptions of country-specific IPE cards and their installation
procedures.
Figure 40
Antistatic wrist strap
Antistatic wrist strap
Figure 41 on page 149 and Figure 42 on page 150 show the circuit card
assignments for the Main Chassis and Chassis Expander. Follow these
diagrams to make sure that you have all circuit cards inserted in the correct
slots.
assignments for the Main Chassis and Chassis Expander. Follow these
diagrams to make sure that you have all circuit cards inserted in the correct
slots.
CAUTION
Always handle circuit cards with caution to avoid damage caused by
static electricity. Always store circuit cards that are not in use in an
antistatic bag or the original packaging
static electricity. Always store circuit cards that are not in use in an
antistatic bag or the original packaging
Wear an antistatic wrist strap, such as the one shown in Figure 40,
when handling circuit cards. Static electricity can damage circuit card
components.
when handling circuit cards. Static electricity can damage circuit card
components.
Antistatic
wrist strap
wrist strap