Nortel Networks Option 11C Mini ユーザーズマニュアル
Chapter 13 — Installing and connecting the cross-connect terminal
Page 179 of 332
Option 11C Mini
Planning and Installation Guide
For
1.5 Mbit and 2.0 Mbit DTI/PRI-related wiring and cable information,
refer to the following documents:
•
Option 11C 1.5Mbit DTI/PRI Administration and Maintenance Guide
(553-3011-310)
(553-3011-310)
•
Option 11C 2.0 Mbit DTI/PRI Administration and Maintenance Guide
(553-3011-315) for
(553-3011-315) for
Procedure 22
Connecting the cables
Connecting the cables
1
Loosen the velcro straps at each connector you plan to use.
2
Connect a 25-pair cable to each of the connectors that will
contain a line or trunk card. Refer to the card slot assignment
plan.
contain a line or trunk card. Refer to the card slot assignment
plan.
Make sure you tag both ends of each cable with the chassis and
connector numbers. See Figure 52.
connector numbers. See Figure 52.
Figure 52
Cable connectors on the back of the Main Chassis
Cable connectors on the back of the Main Chassis
Connector
for slot 3
for slot 3
Connector
for slot 2
for slot 2
Connector
for slot 1
for slot 1
Connector for
slot 5 and half
of slot 6
slot 5 and half
of slot 6
Connector for
slot 4 and half
of slot 6
slot 4 and half
of slot 6