Nortel Networks Option 11C Mini ユーザーズマニュアル
Page 216 of 332
Chapter 16 — Starting the Option 11C Mini and installing software
553-3021-209
Standard 3.00
April 2000
Procedure 29
Installing software
Installing software
1
Make sure the MSC card is in CPU slot (slot 0) of the Main
Chassis.
Chassis.
For first-time installations, software is installed from the MSC card.
Software is loaded on the MSC card before it is sent to the customer
site.
Software is loaded on the MSC card before it is sent to the customer
site.
2
Observe the terminal screen.
One of two messages appear, and the software installation continues
accordingly. If the message is:
accordingly. If the message is:
INSERT SOFTWARE DELIVERY CARD
Go to Step 3.
OR if the following is displayed:
SOFTWARE INSTALLATION PROGRAM
go to Step 4 on page 217.
3
Skip this step unless you are using the Software Delivery (PCMCIA) to
install the software.
install the software.
If you have not already done so, install the Software Delivery card
in Slot A in the socket in the faceplate of the MSC card.
in Slot A in the socket in the faceplate of the MSC card.
Note: You do not have to turn off the system power before you install
the Software Delivery card in Slot A.
the Software Delivery card in Slot A.
See Figure 64.
Insert the card in slot A in the PCMCIA socket located in the faceplate
of the NTDK97 MSC card. Carefully press on the Software Delivery
card until it is firmly seated. See Figure 64.
of the NTDK97 MSC card. Carefully press on the Software Delivery
card until it is firmly seated. See Figure 64.