Nortel Networks 4050 ユーザーズマニュアル
490 Chapter 10 Configuring system settings
320818-A
Managing RADIUS audit servers using the CLI
To configure the Nortel SNAS 4050 to use external RADIUS audit servers, use the
following command:
following command:
/cfg/sys/adm/audit/servers
The RADIUS Audit Servers menu displays.
The RADIUS Audit Servers menu includes the following options:
vendortype
Corresponds to the Vendor-Type value used in
combination with the Vendor-Id to identify event log
information from the Nortel SNAS 4050 cluster.
combination with the Vendor-Id to identify event log
information from the Nortel SNAS 4050 cluster.
The default Vendor-Type value is 2
(Alteon-ASA-Audit-Trail).
(Alteon-ASA-Audit-Trail).
ena
Enables RADIUS auditing.
The default is disabled.
dis
Disables RADIUS auditing.
The default is disabled.
/cfg/sys/adm/audit/servers
followed by:
list
Lists the IP addresses of currently configured RADIUS
audit servers, by index number.
audit servers, by index number.
del <index number>
Removes the specified RADIUS audit server from the
current configuration. The index numbers of the
remaining entries adjust accordingly.
current configuration. The index numbers of the
remaining entries adjust accordingly.
To view the index numbers of all configured RADIUS
audit servers, use the
audit servers, use the
list
command.
/cfg/sys/adm/audit
followed by: