Nortel Networks 4050 ユーザーズマニュアル
530 Chapter 10 Configuring system settings
320818-A
Adding an NTP server
To add an additional NTP server, perform the following steps:
1
Select the System > Date and Time tab.
The Date and Time screen appears (see
).
2
Click Add.
The Add NTP Server dialog box appears (see
).
Figure 146
Add NTP Server
3
Enter the NTP Server information in the applicable fields.
describes
the Add NTP Server fields.
4
Click Add.
The NTP server appears in the NTP Server Table.
5
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Table 106
Add NTP Server fields
Field
Description
IP Address
Specifies the IP address of an NTP server. An index
number is automatically assigned to the server.
number is automatically assigned to the server.