Nortel Networks 608(WL) ユーザーズマニュアル

Advanced Features

E-DOC-CTC-20051017-0169 v0.1

Push IP address

[push_ip]

The VPN server will always provide an IP address to the remote VPN client. VPN 
clients can behave in two different ways. 
Either:
the VPN client requests an IP address. Then the VPN server responds to this 
request, and provides a suitable IP address.
Or:
The VPN client does not issue a request for an IP address. In this case, the VPN 
server pushes an IP address to the VPN client. The client acknowledges the receipt 
of the IP address. 

VPN clients IP address

range

Specifies the range of IP addresses from which the client addresses are selected. An 
address range or a subnet can be entered for this parameter.

Examples:

10.20.30.[5-50]

10.20.30.0/24

Client netmask

Specifies the netmask provided to the client. Either the dotted decimal format can 
be used, or an integer between 0 and 32 can be entered.

Examples:

255.255.255.0

24

XAuth pool

This parameter contains the symbolic name of the XAuth users pool. A specific 
command group is available to define a XAuth pool. See section XAuth Users Pool.

push_ip

Possible values

Description

default value

enabled

VPN server does 
not await client 
request for IP 
address and 
pushes an IP 
address to client.

disabled

disabled

VPN server waits 
for a client 
request before 
assigning an IP 
address to the 
client.