Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Nxp Semiconductors
  4. UM10237
  5. ユーザーズマニュアル

Nxp Semiconductors UM10237 ユーザーズマニュアル

ダウンロード
ページ / 792
UM10237_2
© NXP B.V. 2008. All rights reserved.
User manual
Rev. 02 — 19 December 2008 
607 of 792
NXP Semiconductors
UM10237
Chapter 22: LPC24XX I
2
C interfaces I
2
C0/1/2
1. Read data byte from I2DAT into Master Receive buffer.
2. Write 0x14 to I2CONSET to set the STO and AA bits.
3. Write 0x08 to I2CONCLR to clear the SI flag.
4. Exit
10.9 Slave Receiver states
10.9.1 State : 0x60
Own Slave Address + Write has been received, ACK has been returned. Data will be 
received and ACK returned.
1. Write 0x04 to I2CONSET to set the AA bit.
2. Write 0x08 to I2CONCLR to clear the SI flag.
3. Set up Slave Receive mode data buffer.
4. Initialize Slave data counter.
5. Exit
10.9.2 State : 0x68
Arbitration has been lost in Slave Address and R/W bit as bus Master. Own Slave Address 
+ Write has been received, ACK has been returned. Data will be received and ACK will be 
returned. STA is set to restart Master mode after the bus is free again.
1. Write 0x24 to I2CONSET to set the STA and AA bits.
2. Write 0x08 to I2CONCLR to clear the SI flag.
3. Set up Slave Receive mode data buffer.
4. Initialize Slave data counter.
5. Exit.
10.9.3 State : 0x70
General call has been received, ACK has been returned. Data will be received and ACK 
returned.
1. Write 0x04 to I2CONSET to set the AA bit.
2. Write 0x08 to I2CONCLR to clear the SI flag.
3. Set up Slave Receive mode data buffer.
4. Initialize Slave data counter.
5. Exit
10.9.4 State : 0x78
Arbitration has been lost in Slave Address + R/W bit as bus Master. General call has been 
received and ACK has been returned. Data will be received and ACK returned. STA is set 
to restart Master mode after the bus is free again.
1. Write 0x24 to I2CONSET to set the STA and AA bits.
2. Write 0x08 to I2CONCLR to clear the SI flag.