Foundry Networks OSI ユーザーズマニュアル
February 2003
© 2003 Foundry Networks, Inc.
A-1
A
PPENDIX
A
T
ROUBLESHOOTING
Diagnosing Switch Indicators
Power and Cooling Problems
If the power indicator does not turn on when the power cord is plugged in,
you may have a problem with the power outlet, power cord, or internal
power supply. However, if the unit powers off after running for a while,
you may have a problem with the power outlet, power cord, or internal
power supply. However, if the unit powers off after running for a while,
Troubleshooting Chart
Symptom
Action
Power LED is Off
•
Internal power supply is disconnected.
•
Check connections between the switch, the power
cord, and the wall outlet.
cord, and the wall outlet.
•
Contact Technical Support.
Power LED is Red
•
Internal power supply has failed. Contact your local
dealer for assistance.
dealer for assistance.
Link LED is Off
•
Verify that the switch and attached device is powered
on.
on.
•
Be sure the cable is plugged into both the switch and
corresponding device.
corresponding device.
•
Verify that the proper cable type is used and its length
does not exceed specified limits.
does not exceed specified limits.
•
Check the adapter on the attached device and cable
connections for possible defects. Replace the defective
adapter or cable if necessary.
connections for possible defects. Replace the defective
adapter or cable if necessary.