Linksys WET11 ユーザーズマニュアル
6
Chapter 3: Getting to Know the Wireless-B Ethernet Bridge
The Back Panel
The Back Panel
Wireless-B Ethernet Bridge
Chapter 3: Getting to Know the Wireless-B Ethernet Bridge
The Back Panel
All connections to the Bridge are made through the ports in its back panel, shown in Figure 3-1.
Reset
The Reset button resets the Bridge to its factory default settings.
X-II
The X-II (MDI/MDI-X) slide switch offers a choice between two settings. Use the X setting if you
are connecting the Bridge to a network adapter. Use the II setting if you are connecting the
Bridge to a hub or switch.
are connecting the Bridge to a network adapter. Use the II setting if you are connecting the
Bridge to a hub or switch.
LAN
The LAN port is where you will connect the Ethernet network cable.
Power
The Power port is where you will connect the power adapter.
Important: Resetting the Wireless-B Ethernet
Bridge will erase all of your settings (WEP
encryption, wireless settings, etc.) and replace
them with the factory defaults. Do not reset the
Wireless-B Ethernet Bridge if you want to retain
these settings.
Bridge will erase all of your settings (WEP
encryption, wireless settings, etc.) and replace
them with the factory defaults. Do not reset the
Wireless-B Ethernet Bridge if you want to retain
these settings.
Figure 3-1: Back Panel