Linksys WMP11 ユーザーズマニュアル

11

Instant Wireless

®

Series

10

Wireless-B PCI Adapter

Chapter 5: Software Installation
and Configuration for Windows

98SE, Me, and 2000

The Wireless-B PCI Adapter Setup Wizard will guide you through the installa-
tion procedure for Windows 98SE, Me, and 2000. The Setup Wizard will install
the WLAN Monitor and Device Driver, as well as configure the Adapter.

Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup
Wizard should run automatically, and Figure 5-1 should appear.  If it does not,
click the Start  button and choose Run. In the field that appears, enter
D:\setup.exe (where “D” is the letter of your CD-ROM drive).  

Important for Windows 98SE, Me, and 2000 users: You must run
the Setup Wizard to install the software before installing the hardware.

3. The screen in Figure 4-9 will appear. Enter the WEP key of your wireless

network in the Network key field, and re-enter it in the Confirm network key
field. Click the Connect button.

To find the WEP
encryption key set-
tings of the other
wireless devices in
your network, such
as the WAP11
Wireless Access
Point, you may use
any device’s web-
based utility to
check the WEP
encryption screen
for the correct key
entries.  If you are
using other manu-
facturers’

access

points, refer to their
documentation for
more information
about WEP encryp-
tion. 

4. The screen in Figure 4-10 will

appear if your connection is
active.

For more information about WEP, refer to your access point’s user guide, or
visit www.linksys.com.

For more information about wireless networking on a Windows XP computer,
click  Start and then Help and Support. Enter the keyword wireless in the
field provided, and press the Enter key.

Note: Windows XP does not support the use of a passphrase. Enter the
exact WEP key used by your access point.