LevelOne WNC-0300 ユーザーズマニュアル
●Maximum Power Save – the device consumes the least power and only operates
when there is wireless network activity.
●Power Save – the device consumes the moderate level of power
●Data Encryption –for WEP data encryption feature. If one of the two options is
selected, it is required to select the Authentication mode from the next dropping list.
Auth. Mode: There are three modes available to choose.
when there is wireless network activity.
●Power Save – the device consumes the moderate level of power
●Data Encryption –for WEP data encryption feature. If one of the two options is
selected, it is required to select the Authentication mode from the next dropping list.
Auth. Mode: There are three modes available to choose.
Open Authentication – the sender and receiver do not share secret Key for
communication. Instead, each party generates its own key-pairs and asks the other
party to accept it. The key is regenerated when the connection is established every
time.
party to accept it. The key is regenerated when the connection is established every
time.
Shared Authentication – the sender and receiver shares the common key for
data communication, and the key is used for extended length of time.
Auto – depend on the communication to establish, and automatically use the
proper authentication mode.
The following will only be activated to allow for configuration when Encryption is
enabled.
Default Key: select one of the 4 keys to use.
Network Key: enter values to these fields, either in HEX or ASCII formats. You
only have to enter the key that you will use
Key Length: select 64 or 128 bits as the length of the keys
Key Format: ASCII or HEX
The following will only be activated to allow for configuration when Encryption is
enabled.
Default Key: select one of the 4 keys to use.
Network Key: enter values to these fields, either in HEX or ASCII formats. You
only have to enter the key that you will use
Key Length: select 64 or 128 bits as the length of the keys
Key Format: ASCII or HEX
17