Lantronix 485 ユーザーズマニュアル

Device Installer 

3.  No serial data is received for one second after the last + character. At this time the unit will respond 

affirmatively per the selected echo/response mode. 

4.  The character string ATH is received, terminated with a carriage return. The unit will respond 

affirmatively per the selected echo/response mode and drop the network connection. The serial interface 
will revert to accepting command strings. 

If the above sequence is not followed, the unit will remain in data transfer mode. 

ATDTx.x.x.x,pppp or  
ATDTx.x.x.x/pppp  

Makes a connection to an IP address (x.x.x.x) and a remote port number 
(pppp).  

ATDTx.x.x.x  

Makes a connection to an IP address (x.x.x.x) and the remote port number 
defined within the unit.  

ATD0.0.0.0  

Forces the unit into Monitor Mode if a remote IP address and port number are 
defined within the unit.  

ATD  

Forces the unit into Monitor Mode if a remote IP address and port number are 
not defined within the unit.  

ATDx.x.x.x  

Makes a connection to an IP address (x.x.x.x) and the remote port number 
defined within the unit.  

ATH  

Hangs up the connection (Entered as +++ATH ).  

ATS0=n  

Enables or disables connections from the network going to the serial  
port.  
n=0 disables the ability to make a connection from the network to the serial port. 
n=1-9 enables the ability to make a connection from the network  
to the serial port.  
n>1-9 is invalid.  

ATEn  

Enables or disables character echo and responses.  
n=0 disables character echo and responses.  
n=1 enables character echo and responses.  

ATVn  

Enables 1-character response or full verbose.  
n=0 enables 1-character response.  
n=1 enables full verbose.  

 

Disable or enable the ability to send the escape sequence. The default is Y (Yes) (send the escape sequence). 

Y (Yes) auto increment the source port. The NET232 increments the port number used with each new 
connection 

3-34 

NET485 User Guide