WatchGuard Technologies V100 ユーザーズマニュアル

Firebox V10, V60, V60L, V80, and V100 Components

Firebox V10, V60L, V60, V80, V100 Hardware Guide

11

Enables you to connect the appliance (using the 
supplied power cord) to a 100 to 240VAC (50/
60Hz) power source. The power supply can auto-
detect 110/220 voltage.

Allows you to turn the appliance on or off.

Allows you to use the RS-232 cable provided in the 
package to connect the appliance to an 
Uninterruptable Power Supply (UPS). This type of 
connection enables UPS devices to notify the 
appliance if the power goes out, prompting the 
appliance to shut itself down properly.

UPS devices from American Power Company 
(APC) are currently supported by the Firebox 
Vclass power management firmware. Check the 
WatchGuard Web site (www.watchguard.com) for 
updated information on complete UPS support.

N

OTE

In the event of a power failure, this security appliance, if left 
connected to the power source, will automatically restart 
itself after electrical power has been restored. You do not 
have to press either the Power button on the front or the 
power supply switch on the back of the appliance.

Firebox V10, V60, V60L, V80, and V100 
Components

Every appliance has three sets of components: 

A well-integrated chip set and memory system 
powers every Firebox Vclass appliance in its