Western Digital Network hard drive ユーザーズマニュアル

SETTING UP THE NETCENTER – 5

NETCENTER

USER MANUAL

Setting Up the NetCenter

This section contains instructions for positioning, connecting, and powering up the 
NetCenter drive.

„

Power button—Turns the NetCenter on or off

„

Power button light—Indicates drive activity. The drive is ready for use when the light 
glows blue steadily.

„

USB 2.0 ports—Connect to up to two USB devices such as printers or external hard 
drives.

„

Ethernet port—Connects to an open router or network switch port using an Ethernet 
cable.

„

Power supply socket—Connects to the supplied power adapter and cable.

„

Reset button—Resets the NetCenter’s network configuration, device name, and 
password without erasing shared folders or volumes. See “Resetting the NetCenter” on 
page 8 for more information on using the reset button.

„

®

 security slot—Connects to security cable and lock.

1. With the NetCenter powered off, disconnect all 

cables.

2. Place the drive upside down on a clean and steady 

surface.

3. Press a stand onto the bottom panel of the unit 

until it snaps into place.

4. Repeat this process for the other stand.

CAUTION: Do not drop or jolt the NetCenter!

Power button

Power button light

Front view

Rear view

USB 2.0 ports

Ethernet port

DC power supply socket

Reset button

Kensington security slot