Zhone Technologies Z-PLEX-10-24-DOC-SC ユーザーズマニュアル

ページ / 101
Zhone Technologies / 2-3
Installing the Z-Plex
Installing the product
2.2.4
Hardware, cabling, and optional accessories
The product comes packaged with an AC power cord to provide power to the unit. It is also 
shipped with two angle brackets and screws for rack mounting. 
2.2.5
Who to call for help
Contact your distributor if any items are missing, or if you want to order another unit. 
2.3
Installing the product
The product can be installed in a rack, on a desktop, or attached to a wall using appropriate 
wall anchors and brackets. It is necessary to read the information that follows to ensure proper 
reliability of the unit.
2.3.1
Choosing a site for the product
When choosing a site for the product, make sure that you follow the installation instructions. 
Provide adequate ventilation and ample room for cable routing.
2.3.2
Temperature specifications
Shipping and storage: -40
o
c to +70
o
c (-40
o
F to 158
o
F)
Operating range: -5
o
c to +50
o
c (23
o
F to 122
o
F)
Relative Humidity: 5% to 95% non-condensing
Note:
The product is equipped with a fan to ensure proper cooling and reliability. In the 
event that the installation environment temperature exceeds the temperature 
specifications, it is recommended that adjustments be made. Improper operation 
outside of these temperatures may result in performance degradation.
2.3.3
Important Safety Instructions
There are several precautions to take before installing and/or servicing the product.
Read and follow all warning notices and instructions marked on the product or included in this 
guide.