Zhone Technologies Z-PLEX-10-24-DOC-SC ユーザーズマニュアル
Zhone Technologies / 4-1
Configuring the Z-Plex
Using the command line interface
Chapter 4
Configuring the Z-Plex
Configuring the Z-Plex
In this chapter you will learn how to configure the Z-Plex unit using the CLI. It includes the
following topics:
following topics:
4.1
Using the command line interface
The CLI commands use the following format:
SET
group:parameter:index:value
to change the value of a read/write parameters.
GET
group:parameter:index:value
for read-only parameters or to view the current
configuration of a parameter without making any changes.
•
group identifies the configuration grouping of the parameter. For example, T1CFG.
•
parameter identifies the actual configuration element. For example, FRAME.
•
index identifies the physical index of the element you want to configure. Most elements
have an index of 1. T1 lines have 2 indexes, which correspond to the 2 WAN interfaces.
have an index of 1. T1 lines have 2 indexes, which correspond to the 2 WAN interfaces.
For example, to activate the first T1 line, enter the following command: