Zhone Technologies Z-PLEX-10-24-DOC-SC ユーザーズマニュアル
Zhone Technologies / 4-15
Configuring the Z-Plex
System maintenance commands
user> GET ROUTE:HOST:1
>The Host Destination is: 192.168.21.32
>The Host Gateway is: 12.12.1.1
4.9.4.2
Displaying network routes
To display information about all host routes, enter the ROUTE:NETALL:x command. For
example:
example:
user> GET ROUTE:NETALL:1
>Net Destination 1: 172.16.0.0
>Net Gateway 1: 12.12.0.0
To display information about particular network routes, enter the ROUTE:NET:x
command. For example, the following command displays information about host route 1:
command. For example, the following command displays information about host route 1:
user> GET ROUTE:NET:1
>The Net Destination is: 172.16.0.0
>The Net Gateway is: 12.12.0.0
4.10
System maintenance commands
This section describes the Z-Plex system maintenance commands.
4.10.1 Rebooting the system
To reboot the system, enter the following command:
user>
REBOOT
4.10.2 Displaying flash information
To display information about the code images in flash, enter the following command:
user> QUERYIMAGE
Original Code
->Software version : EMPTY
->Checksum : 0x0
BANK1
->Software version : ZPLEX10_1.0.0#6
->Checksum : 0x50a78d4c