Promise Technology TX4000 ユーザーズマニュアル
FastTrak TX4000 User Manual
6
Installing the FastTrak TX4000 Card
The FastTrak TX4000 Controller card fits into any available 32-bit PCI slot (must
be PCI 2.1 or 2.2 compliant). It also fits the 32-bit portion of a 64-bit PCI slot, on
the system’s motherboard (see figure below).
be PCI 2.1 or 2.2 compliant). It also fits the 32-bit portion of a 64-bit PCI slot, on
the system’s motherboard (see figure below).
1.
Remove the cover of your system.
2.
Remove the inside slot cover of an available 32-bit PCI slot on the
motherboard.
motherboard.
3.
Install the FastTrak TX4000 Controller card into the open slot (see Figure 1
below). Secure the bracket to the system’s frame.
below). Secure the bracket to the system’s frame.
4.
Attach your system case’s 2- or 4-pin LED cable to the LED connector on
the FastTrak TX4000 Controller card (see Figures 2 and 3, below). Make
sure that pin 1 on the connector is aligned with pin 1 of the cable.
the FastTrak TX4000 Controller card (see Figures 2 and 3, below). Make
sure that pin 1 on the connector is aligned with pin 1 of the cable.
5.
Fasten the controller card bracket to the system case (see below).
Figure 1.
Insert the FastTrak TX4000 card into an open PCI slot.