Promise Technology TX4000 ユーザーズマニュアル
Chapter 2: Quick Start
9
Creating Your Disk Array
You will now use the onboard FastBuild BIOS utility to create your array using
the attached drives. There are three different scenarios in creating this array.
You can create an array for performance, you can create a Security array using
new hard drives (recommended), or you can create a Security array using an
existing hard drive and a new hard drive.
the attached drives. There are three different scenarios in creating this array.
You can create an array for performance, you can create a Security array using
new hard drives (recommended), or you can create a Security array using an
existing hard drive and a new hard drive.
Warning
If creating a Security array using an existing hard drive, backup
any necessary data. Failure to follow this accepted PC practice
could result in data loss.
any necessary data. Failure to follow this accepted PC practice
could result in data loss.
Boot your system. If this is the first time you have booted with the FastTrak
TX4000 card and drives installed, the Promise onboard BIOS will display the
following screen.
TX4000 card and drives installed, the Promise onboard BIOS will display the
following screen.
FastTrak TXx000 (tm) BIOS Version 1.xx (Build xxxx)
(c) 2002-2005 Promise Technology, Inc. All Rights Reserved.
No array defined . . .
Press <Ctrl-F> to enter FastBuild (tm) Utility
Or press <ESC> key to continue booting the system.
Press <Ctrl-F> to enter FastBuild (tm) Utility
Or press <ESC> key to continue booting the system.
Press the Ctrl-F keys to display the FastBuild Utility Main Menu.
Press “1” to display the Auto Setup Menu below. This is the fastest and easiest
method to creating your first array.
method to creating your first array.