Promise Technology 66 Pro ユーザーズマニュアル

SuperTrak66™ User's Manual 

Chapter 5 

 

- 94 - 

1)  To halt the Rebuild process, right-click the Array # again.  
2)  The pull-down menu will appear showi ng the Stop Rebuild option as shown 

below (see below). 

3)  Once "Stop Rebuild" is selected, you will be asked to verify "Cancel Rebuild?" 
4)  Click "OK" to Stop or "No" to continue Rebuild. 
 
NOTE: You may also start/continue, pause, or stop the process using the Toolbar 
icons. 
 

 

Figure 75: Stop Rebuild pull-down 

 

Synchronization is a periodic maintenance procedure for Mirroring (RAID 1, 0+1, 3, 
and 5) arrays to maintain data consistency on all mirrored drives. In operation, 
array synchronization compares data on the mirrored drives for any differences.  If 
there are differences detected, data from the primary drive(s) is automatically 
copied to the secondary drive(s). This assures that all mirrored drives will contain 
the exact information.  
 
NOTE: Users may choose to schedule synchronization during unattended, off -peak 
hours (see page 74). 
 
1)  To manually synchronize drives from SuperCheck, choose the icon of the 

mirrored Array in Tree View. 

2)  Right-click the array icon, and choose “Synchronize” from the pull-down menu 

(see  Figure  76) or select "Array" from pull down menu at top and choose 
"Synchronize" from the pull-down menu. This will initiate the process.  

3)  You will be returned to the main SuperCheck screen. A progress bar will 

display at the bottom of the window.