Raritan Engineering CC-SG ユーザーズマニュアル

C

HAPTER 

5:

 ADDING DEVICES AND DEVICE 

G

ROUPS

 67 

 

 

 

Discover Devices 

Use this command to initiate a search for all devices on your system. The search will 
automatically detect all newly attached, and previously existing Raritan devices on your network, 
including Paragon, P2-SC, IP-Reach, Dominion KX, Dominion KSX units, IPMI servers, and 
CC-SGs. After locating the devices, you may connect them to your CC-SG system if they are not 
already connected. 

1.  Click on the Devices tab.  
2.  On the Devices menu, click Discover Devices. The Discover Devices screen appears. 

 

3.  Type the range of IP addresses where you expect to find the devices in the From Address 

and To Address fields. The To Address should be larger than the From Address. Specify a 
mask to apply to the range.  If a mask is not specified, then a broadcast address of 
255.255.255.255 is sent, which broadcasts to all local networks. To discover devices across 
subnets, you must specify a mask. 

4.  Click  Broadcast discovery if searching for devices on the same subnet on which CC-SG 

resides. Uncheck Broadcast discovery to discover devices across all subnets. 

5.  To search for a particular type of device, highlight it in the list of Device types. By default, 

ALL device types are highlighted. Use Ctrl+click to select one or more device types. 

6.  Click OK to start the search, or Cancel to exit without searching, or Stop to discontinue the 

discovery process. Discovered devices appear in a Discover Devices list.