Zhone Technologies 600 ユーザーズマニュアル
Server Cards
7-7
IMUX Card
Inverse Multiplexer (IMUX) Card Settings
Table 7-5. The HSU Card Dial Screen Settings and Options
PRIMARY #
The Primary Number is the main phone number used to route incoming (non-IMUX) calls for
this HSU port. This number must be unique throughout all HSU ports in the system. The
number must be within the range of numbers assigned by the carrier controlling the ISDN
switch.
this HSU port. This number must be unique throughout all HSU ports in the system. The
number must be within the range of numbers assigned by the carrier controlling the ISDN
switch.
HUNT GROUP #
The Hunt Group number is an optional number that makes the port of this HSU part of a hunt
group. The hunt group number is the same for all HSU ports in the hunt group. The system
will route any incoming (non IMUX) call placed to the hunt group number to the first available
HSU port in the group. A hunt group number must be within the range of numbers assigned
by the carrier controlling the ISDN switch.
group. The hunt group number is the same for all HSU ports in the hunt group. The system
will route any incoming (non IMUX) call placed to the hunt group number to the first available
HSU port in the group. A hunt group number must be within the range of numbers assigned
by the carrier controlling the ISDN switch.
AUTO ANSWER
The Auto Answer feature allows the HSU port to automatically answer an incoming call for
either the primary number or the hunt group number. A value of yes means the equipment will
always accept the incoming call for a port that is not busy. A value of no means the HSU will
not answer the call until the attached DTE responds with DTR high. RS530 ports will respond
to auto answer with the Ring Indicator lead, V.35 ports must be set to auto answer for this
version of the software.
either the primary number or the hunt group number. A value of yes means the equipment will
always accept the incoming call for a port that is not busy. A value of no means the HSU will
not answer the call until the attached DTE responds with DTR high. RS530 ports will respond
to auto answer with the Ring Indicator lead, V.35 ports must be set to auto answer for this
version of the software.
ANSWER TIMEOUT
If the user chooses no for Auto Answer (above), the Answer Timeout parameter tells the
system how long to wait for the DTE to raise DTR after the call has been sent to the DTE. This
parameter is measured in seconds, and the valid choices are 1-60.
system how long to wait for the DTE to raise DTR after the call has been sent to the DTE. This
parameter is measured in seconds, and the valid choices are 1-60.
Parameter
User Options
Default
PRIMARY #
up to 10 numeric characters
0000000000
HUNT GROUP #
up to10 numeric characters
0000000000
AUTO ANSWER
yes no
yes
ANSWER TIMEOUT
01-60
01
DIAL TRIGGER
off dtr rs366 v.25b
off
ESCAPE CHAR
* # 5 6 7 9 0 00
*
IMUX PRIMARY #
up to 10 numeric characters
0000000000
IMUX HUNT #
up to 10 numeric characters
0000000000
IMUX ADD #
up to 10 numeric characters
0000000000
CURRENT PROFILE
none loaded
none