Zhone Technologies 900 ユーザーズマニュアル
5-20
Server Cards
Model No.
Running Head
ISDN-PRI Card User Screens and Settings
ISDN-PRI Card
In the example shown in Figure 5-9, for D channel #1, the user plans to assign B channels on
WAN 1-1, 1-2 and 2-1.
WAN 1-1, 1-2 and 2-1.
To change an interface ID, place the cursor over the desired Intf. ID, and press the “Enter”
Key. Input the correct value in the space provided using the up and down arrow keys and press
the “Enter” key again. Save your work, and press “m” to return to the main D channel
configuration screen.
Key. Input the correct value in the space provided using the up and down arrow keys and press
the “Enter” key again. Save your work, and press “m” to return to the main D channel
configuration screen.
Figure 5-9. Interface Identification Screen
5.3.6
Assigning B Channels
Choosing the “Bmap” option from the D channel configuration screen of the ISDN card screen
brings up the subscreen shown in Figure 5-10. This figure shows a typical “Bmap” screen. It
is a detailed map of all the WAN timeslots available to users as potential B channels.
brings up the subscreen shown in Figure 5-10. This figure shows a typical “Bmap” screen. It
is a detailed map of all the WAN timeslots available to users as potential B channels.
When D channel #1 is placed in the “Configure” mode, the system recognizes the assignment
of WAN 1-1, timeslot #24 to this D channel and places it on the Bmap in the proper location.
Notice that since all WAN links are T1 interfaces, the Bmap shows the last 7 places with a
dash (-) indicating that the timeslot is unavailable for assignment.
of WAN 1-1, timeslot #24 to this D channel and places it on the Bmap in the proper location.
Notice that since all WAN links are T1 interfaces, the Bmap shows the last 7 places with a
dash (-) indicating that the timeslot is unavailable for assignment.