Zhone Technologies 900 ユーザーズマニュアル

ページ / 240
1-2 
Server Cards
Model No.
Running Head
ADPCM Card Descriptions
ADPCM Card
The ADPCM 64 Card can transport low-speed asynchronous data transmission (19.2 kbps or 
less) from an SRU user card port that will occupy a 24 kbps engine. Each data circuit must be 
paired with a 40 kbps voice channel. The card can also compress B-channel voice traffic from 
a BRI card without restricting compression rates.
The Integrated Access System can have up to three ADPCM 64 Cards (two normal cards and 
an identical redundant card).
The ADPCM 64 Card supports Transition Signaling as defined in ANSI T1.302-1989, with 
the exception of the Alarm bits. ANSI T1.302 specifies signaling at the 32 bps compression 
rate. The card uses this scheme for 24 bps and 40 bps, even though those rates are not included 
in the standard. Table 1-1 summarizes the signals supported by each transcoder data rate. Your 
DS0 time slot configuration must adhere to these specifications.
Table 1-1.  ADPCM Compression Rates
* MOS = Mean Opinion Score based on subjective evaluation
1.2.1.1
Card Jumper/Switch Settings
The ADPCM 64 Card does not have any jumpers or switches on its motherboard.
1.2.1.2
Installing the ADPCM Card
Insert the ADPCM card into one of the server card chassis slots (P1 to P3). The system can 
accommodate up to three server cards.
Transcoder 
Rate
Voice Quality 
(MOS)*
Modem Data
DTMF
FAX
24 kbps
3.6-3.8 Range
no
no
no
32 kbps
4.0-4.3 Range
up to 4.8 kbps
V.32 9.6 kbps
OK
Group II
40 kbps
4.0-4.3 Range
up to 12 kbps
V.32 14.4 (no/yes)
OK
Group III