Zhone Technologies 900 ユーザーズマニュアル

ページ / 240
8-10 
Server Cards
Model No.
Running Head
Fully Meshed vs. Partially Meshed
IPR Card
8.5.4
Unnumbered IP Interface
When using a point-to-point Frame Relay IP interface, it is sometimes very useful for a user 
not to assign an IP address to this Frame Relay interface, but rather to use an IP address of 
another interface (e.g. Ethernet) in order to conserve an IP address and reduce the addressing 
burden that might otherwise occur. Unnumbered interfaces give the customer an opportunity 
to have just one IP address per whole IPR card, and use this address as a home IP address for 
all the attached WAN interfaces. IPR can be used as any or a combination of the settings 
shown in the previous sections described above. The reason for this is due to the fact that an 
IPR, the customer first defines a logical IP interface, which includes IPRs address on this IP 
interface and then can plug-and-play specified IP interfaces to any physical interface (Ethernet 
and/or PVCs). Figure 8-8 below shows an Unnumbered Interface.
Figure 8-8. Unnumbered Frame Relay IP Interface
Frame Relay
Network
Router
Router
Ethernet IP Net
199.2.2.0
Un-numbered IP Interface
(Uses Ethernet's IP address
of 199.1.1.113)
Ethernet IP Net
199.2.2.0
199.1.1.113
199.1.1.1