Zhone Technologies 900 ユーザーズマニュアル
Server Cards
4-3
ATM Card
ACS-ATM Card User Screens and Settings
4.3
ACS-ATM Card User Screens and Settings
4.3.1
ACS-ATM Card Main Screen
You must configure the ACS-ATM card’s DS3 port for operation after installing it in the
system chassis. This is done from the ACS-ATM Card Main Screen, which is shown in Figure
4-1. To go to this screen, highlight the desired card in the System Main Screen and press
<Enter>.
system chassis. This is done from the ACS-ATM Card Main Screen, which is shown in Figure
4-1. To go to this screen, highlight the desired card in the System Main Screen and press
<Enter>.
Figure 4-1. Typical ACS-ATM Card Main Screen (DS3)
Table 4-1 lists the actions you can perform from the bottom highlighted line of this screen. To
choose an action, type the letter that corresponds to the uppercase letter of the desired action
on this line. For example, to save your option settings, press “s” (for Save).
choose an action, type the letter that corresponds to the uppercase letter of the desired action
on this line. For example, to save your option settings, press “s” (for Save).
Table 4-2 lists the screen parameters and the possible and default settings.