IBM DAS16 ユーザーズマニュアル
PC-CARD-DAS16/16AO User's Guide
Installing the PC-CARD-DAS16/16AO
C50FF-x
The red stripe
identifies pin # 1
50-pin female
IDC connector
50-pin female
IDC connector
1
2
49
50
2
50
1
49
Figure 8. C50FF-x cable
Details on the C50FF-x cable are available on our web site at
.
Field wiring and signal termination
You can use the following cabling, screw termination, and signal conditioning products with the CPCC-50F-39
cable, or with the CPCC-50M-4 and C50FF-x cables:
cable, or with the CPCC-50M-4 and C50FF-x cables:
CIO-MINI50 – 50-pin screw terminal board. Details on this product are available on our web site at
SCB-50 – 50 conductor, shielded signal connection/screw terminal box provides two independent 50-pin
connections. Details on this product are available on our web site at
.
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal
Connections (available at
General information regarding signal connection and configuration is available in the Guide to Signal
Connections (available at
.
Calibrating the PC-CARD-DAS16/16AO
The PC-CARD-DAS16/16AO features auto-calibration with InstaCal. Calibration coefficients for each range
are stored on board in nonvolatile RAM. The normal calibration interval is once per year.
are stored on board in nonvolatile RAM. The normal calibration interval is once per year.
15