HP (Hewlett-Packard) HP Integrated Lights-Out ユーザーズマニュアル

<DIR_SERVER_ADDRESS 
value="administration.wins.hp.com" /> 
<DIR_SERVER_PORT value="636" /> 
<DIR_OBJECT_DN 
value="CN=RILOP5,CN=Users,DC=RILOEGRP2,DC=HP" /> 
<DIR_OBJECT_PASSWORD value="aurora" /> 
<DIR_USER_CONTEXT_1 
value="CN=Users,DC=RILOEGRP2,DC=HP" /> 
<DIR_USER_CONTEXT_2 value="" /> 
<DIR_USER_CONTEXT_3 value="" /> 
<DIR_ROLE 
value="CN=RILOEROLE,CN=Users,DC=RILOEGRP2,DC=HP" /> 
<DIR_LOGIN_NAME value="RILOEGRP2\Adminl" /> 
<DIR_LOGIN_PASSWORD value="aurora" /> 

</MOD_DIR_CONFIG> 
</DIR_INFO> 
</LOGIN> 
</RIBCL> 

 

RIBCL allows for only one firmware image per XML file. The command 
language for HPQLOMGC has been modified to allow for each management 
processor to have a specified firmware image within a single XML file. These 
commands must be displayed within a DIR_INFO block, and DIR_INFO must 
be in write mode. The management processor is reset after the firmware upgrade 
is complete. To update the firmware, the user must be logged in with the 
appropriate privilege. 

This command line uses the following parameters: 

• 

UPDATE_RIB_FIRMWARE IMAGE_LOCATION 
("UPDATE_RIB_FIRMWARE Parameters" on page 

• 

MOD_DIR_CONFIG