HP (Hewlett-Packard) HP Integrated Lights-Out ユーザーズマニュアル

The ADD_USER command is used to add a local user account. The 
USER_NAME and USER_LOGIN parameters must not exist in the current user 
database. Use the MOD_USER command to change an existing user's 
information. For this command to parse correctly, the command must appear 
within a USER_INFO command block, and USER_INFO MODE must be set to 
write. The user must have the administrative privilege.  

All of the attributes that pertain to the user are set using the following 
parameters. 

<RIBCL VERSION="2.0"> 

<LOGIN USER_LOGIN="loginname" PASSWORD="password"> 
<USER_INFO MODE="write"> 
<ADD_USER  

USER_NAME="User" 
USER_LOGIN="username" PASSWORD="password"> 
<ADMIN_PRIV value ="No"/> 
<REMOTE_CONS_PRIV value ="Yes"/> 
<RESET_SERVER_PRIV value ="No"/> 
<VIRTUAL_MEDIA_PRIV value ="No"/> 
<CONFIG_ILO_PRIV value ="No"/> 

</ADD_USER> 
</USER_INFO> 
</LOGIN> 

</RIBCL> 

 

USER_NAME is the actual name of the user. This parameter can be a 
combination of any printable characters up to a maximum length of 39 
characters. This parameter is case sensitive and must never be blank. 

USER_LOGIN is the name used to gain access to the respective iLO. This 
parameter can be a combination of any printable characters up to a maximum 
length of 39 characters. This parameter is case sensitive and must never be blank.