HP (Hewlett-Packard) HP Integrated Lights-Out ユーザーズマニュアル

VM_APPLET = CONNECTED | DISCONNECTED 
DEVICE = FLOPPY | CDROM 
BOOT_OPTION = BOOT_ALWAYS | BOOT_ONCE | NO_BOOT 
WRITE_PROTECT_FLAG = YES | NO 
IMAGE_INSERTED = YES | NO 

 

SET_VM_STATUS sets the Virtual Media drive status. This command must 
display within a RIB_INFO element, and RIB_INFO must be in write mode. All 
the parameters in the command are optional.  

Example: 

<RIBCL VERSION="2.0"> 
<LOGIN USER_LOGIN = "adminname" PASSWORD = "password"> 

<RIB_INFO MODE = "write"> 
<SET_VM_STATUS DEVICE = "CDROM"> 

<VM_BOOT_OPTION value = "BOOT_ONCE"/> 
<VM_WRITE_PROTECT value = "Y"/> 

</ SET_VF_STATUS> 
</RIB_INFO> 

</LOGIN> 
</RIBCL> 

 

DEVICE specifies the Virtual Media device target.  The possible values are 
FLOPPY or CDROM. If the DEVICE is not specified, FLOPPY is assumed. This 
value is case-sensitive. 

VM_BOOT_OPTION specifies the boot option parameter for the Virtual Media. 
For the device to act like the RIBLO Virtual Floppy functionality, the possible 
values are BOOT_ALWAYS, BOOT_ONCE or NO_BOOT. These values 
control how the Virtual Media device behaves after the server is rebooted. To 
control the Virtual Media devices in the same way that they are controlled in the 
Virtual Media applet, the values this parameter are CONNECT or 
DISCONNECT. This value is case-sensitive.