HP (Hewlett-Packard) TC3100 ユーザーズマニュアル

 

After you've installed, cabled, and configured the HP Server Remote Management 
Card using the card's BIOS setup program, you are ready to set options for the HP 
Server Remote Management Card using the Remote Management Card's 
management software.  

Using your web browser you can remotely set all card options including: 

•

 

Setting up an administrator list (up to 16) for system access and 
notification 

•

 

Configuring event management operations, including the enabling of 
paging and e-mail notification 

•

 

Configuring serial communications for external modem 

•

  Configuring LAN access 

Configuring LAN access during a remote connection is not 
recommended. Changing your LAN access settings while 
logged on could terminate your connection. 

•

 

Viewing a log of server events and PCI utilization 

•

 

Viewing current measurement sensors 

•

 

Viewing server screens 

•

  Running memory diagnostics on the server 

•

 

Performing remote firmware or BIOS updates 

•

 

Remotely power on, power off, power cycle, or reset the server  

To initiate a connection to the HP Server Remote Management Card from the 
remote client, connect to the HP Server Remote Management Card via LAN or 
modem connection, as follows: