HP (Hewlett-Packard) 9112 Series ユーザーズマニュアル
Installation
• 7
2.2 Unpacking
The card contains sensitive electronic components that can be easily
damaged by static electricity. Failure to perform the procedure outlined
below may damage the on board devices.
The board is packaged in an anti-static bag to avoid damage to the
sensitive IC on the board. After opening the card module carton, extract
the bag and place it only on a grounded anti-static surface to establish
grounding. The card should be handled on a grounded anti-static mat.
The operator should be wearing an anti-static wristband, grounded at the
same point as the anti -static mat.
Inspect the card for obvious damage. Shipping and handling may cause
damage to your module. Be sure there are no shipping and handing
damages on the module before processing.
damaged by static electricity. Failure to perform the procedure outlined
below may damage the on board devices.
The board is packaged in an anti-static bag to avoid damage to the
sensitive IC on the board. After opening the card module carton, extract
the bag and place it only on a grounded anti-static surface to establish
grounding. The card should be handled on a grounded anti-static mat.
The operator should be wearing an anti-static wristband, grounded at the
same point as the anti -static mat.
Inspect the card for obvious damage. Shipping and handling may cause
damage to your module. Be sure there are no shipping and handing
damages on the module before processing.
Note : DO NOT ATTEMPT TO INSTALL A DAMAGED BOARD IN THE
COMPUTER.
You are now ready to install your card.
2.3 Device Installation for Windows Systems
Once Windows 95/98/2000 has started, the Plug and Play function of
Windows system will find the new NuDAQ/NuIPC cards. If this is the first
time to install NuDAQ/NuIPC cards in your Windows system , you will be
informed to input the device information source. Please refer to the
“Software Installation Guide” for the steps of installing the device.
Windows system will find the new NuDAQ/NuIPC cards. If this is the first
time to install NuDAQ/NuIPC cards in your Windows system , you will be
informed to input the device information source. Please refer to the
“Software Installation Guide” for the steps of installing the device.