Honeywell DCP552 Mark II ユーザーズマニュアル

To connect a line to the terminals, use crimp-style solderless wire connectors that fit an M3.5 screw.

•If the 

is mounted in a location subject to noticeable vibration or

impact, be sure to use round crimp-style solderless wire connectors to
prevent lines from becoming disconnected from the terminals.

•Be careful not to allow any of the crimp-style solderless wire connectors to

touch adjacent terminals or connectors.

•The terminal screws shall be tightened to 0.78 to 0.98 N

•

m torque.

7.4

6.6 or less

¿3.7

7.3 or less

Unit : mm