Motorola SBV5222 ユーザーズマニュアル

Installation

Troubleshooting

Glossary

   

Verify that you have the items pictured below. 

You will need 75-ohm 

with 

 to connect your digital voice modem to the nearest 

cable outlet. If a TV is connected to the cable outlet, you may need a 5–900 MHz RF 

 and a total of three 

coaxial cables to connect both the TV and the digital voice modem. The coaxial cable and RF splitter are available 
at consumer electronics stores. To connect your digital voice modem to an Ethernet hub, see the network 
description in 

 on page 27. Check the documentation provided with your hub.

Connects to the AC power outlet

Connects to the 

 port

Connects the telephone to the cable system to provide telephone service

Your package contents may vary depending on your model

 
USB cable

 
Connects to the 

 port

SURFboard 
Voice 
Modem 
CD-ROM

 
Contains the User Guide and USB drivers

 
 
 
Battery

 
 
 
Provides standby power for your SBV5222 (one each). The SBV5222 has 
the capability to accommodate two standby batteries. For additional standby 
batteries, contact your service provider.

This product is for indoor use only. Do not route the USB, Ethernet, or telephone cables outside of the 
building. Exposure of the cables to lightning could create a safety hazard and damage the product.