Motorola XTR446 ユーザーズマニュアル

ページ / 160
E
nglish
2
PRODUCT SAFETY AND RF EXPOSURE 
FOR PORTABLE TWO-WAY RADIOS
ATTENTION!
Before using this product, read the RF energy 
awareness information and operating instructions in 
the Product Safety and RF Exposure booklet to ensure 
compliance with RF energy exposure limits.
Charger Safety Instructions
Before using the battery charger, read all instructions 
and cautionary markings on:
• the battery
• the battery charger, and
• the radio using the battery.
To reduce the risk of injury, only charge the 
Motorola approved rechargeable battery for this 
product. Other types of batteries may burst, 
causing personal injury and damage.
SAVE THESE INSTRUCTIONS
1.Do not expose the charger to rain or snow.
2.Do not operate or disassemble the charger if it has 
received a sharp blow, or has been dropped or dam-
aged in any way.
3.Never alter the AC cord or plug provided with the unit. 
If the plug will not fit the AC outlet, have the proper 
outlet installed by a qualified electrician. An improper 
condition can result in a risk of electric shock.
4.To reduce the risk of damage to the cord or plug, pull 
the plug rather than the cord when disconnecting the 
charger from the AC outlet
5.To reduce the risk of electric shock, unplug the 
charger from the AC outlet before attempting any 
maintenance or cleaning.
6.Use of an attachment not recommended or sold by 
Motorola may result in a risk of fire, electric shock, or 
personal injury.
7.Make sure the cord is located so it will not be stepped 
on, tripped over, or subjected to damage or stress.
8.An extension cord should not be used unless abso-
lutely necessary. Use of an improper extension cord 
could result in a risk of fire and/or electric shock. If an 
extension cord must be used, make sure:
• That the pins on the plug of the extension cord are the 
same number, size, and shape as those on the plug of 
the charger.
• That the extension cord is properly wired and in good 
electrical condition, and
• That the cord size is 18 AWG (1 mm
2
) for lengths up to 
100 feet (30 metres) and 16 AWG (1.3 mm
2
) for lengths 
up to 150 feet (45 metres).
9.The supply cord of this charger cannot be replaced. If 
the cord is damaged please return to your place of 
purchase.
Before using this product, read the 
operating instructions for safe usage 
contained in the Product Safety and RF 
Exposure booklet
 
enclosed with your 
radio.
!
C a u t i o n
!
C a u t i o n
6864234V01-A_EN Final2.fm  Page 2  Monday, August 14, 2006  3:38 PM