Motorola W24 ユーザーズマニュアル

For more details on implementing a GPRS/EGPRS signal for use with G24, please refer to the 
"Motorola G24 Developer's Guide - Module Hardware Description" PN 6889192V27

This signal is routed from the 70-pin host connector to G24 70-pin connector via W24. It is not 
internally connected to W24 circuits. If the W24 will be used as stand alone only, the signal pin 
should be left open.

For more details on implementing a GPRS/EGPRS signal for use with G24, please refer to the 
"Motorola G24 Developer's Guide - Module Hardware Description" PN 6889192V27

Wi-Fi LED Indicator is an output which indicates the Wi-Fi activity. WIFI_LED_LCD_RS signal 
is mapped on the pin 60 of the 70-pin Host Connector.

This signal sets the W24 mode of operation. It should be left open for normal operation. If pulled 
to ground at power up for 3s, it forces a module in boot mode.