Motorola V.34-SDC ユーザーズマニュアル

Configuration Quick Reference A-37

The following options require you to enter information using the front panel or ACU.

The keystrokes to set the numeric entry for these options are as follows:

1) Step across the front panel menu by pressing 

 until the option you want to 

change displays.

2) Press 

. You are now ready to key in the numeric entry.

3) Press 

 until the digit or character you want appears in the leftmost position 

of the display.

Example: 1xxxxx

4) Press 

. The display shifts one position to the left, and the second character 

position is displayed.

5) Repeat Steps 3 and 4 until you have completed keying in the numeric entry. To 

re-enter a number or character, press 

 to place the cursor at the beginning of 

the line, then re-enter the number or character.

6) Press 

 to save your selection.

Enter Phone #=n

Stores phone number to phone book memory in location n.

Enter Then Dial

Lets you dial from the front panel.

S-Reg xxx=nnn

Lets you set S-Register xxx to nnn.

LPDA-2 Addr=nnn

Lets you set the LPDA2 address.

Enter PW:nnnn

Lets you unlock a modem’s password protection.

Old PW:nnnn

Lets you enter old password.

New PW:nnnn

Lets you configure new password.

Verify PW:nnnn

Lets you verify new password.

Enter Group PW:

Lets you verify group password.

NC Address:nnn

Lets you set network control address.

New Address:nnn

Lets you set remote modem’s leased line address.

Rmt Ser:nnnnnnn

Lets you enter remote modem’s serial number.