Motorola 326X V.34 ユーザーズマニュアル
3-4 Getting Started
G
e
tt
ing Start
e
d
Front Panel Display
The front panel has a 16-character alphanumeric LCD display (see Figure 3-2 or
3-3). You access the configuration menu tree through this display, to:
3-3). You access the configuration menu tree through this display, to:
• Configure the modem
• Store and view telephone numbers
• Initiate and answer calls
• View status information
• Run online tests
• Enter passwords and network addresses
• Store and view telephone numbers
• Initiate and answer calls
• View status information
• Run online tests
• Enter passwords and network addresses
CD
Data Carrier
Detect
Detect
On when the local modem receives a carrier signal (as
defined by the current modulation mode) from the remote
modem or when the DCD parameter=High.
defined by the current modulation mode) from the remote
modem or when the DCD parameter=High.
TR
Data Terminal
Ready
Ready
On when a DTR signal from a terminal is detected.
RC/NC
Remote Control/
Network Control
Network Control
Flashes to indicate that the modem is under remote
configuration (via front panel or AT ACU).
configuration (via front panel or AT ACU).
On when the modem is under NMS control.
A/B
A or B
Enclosure cards only.
On when modem A front panel information is displayed.
Off when modem B front panel information is displayed.
To toggle between modem A and modem B front panels, hold
and then press
.
ALM
Alarm
Enclosure cards only.
On when a test is in progress or a modem failure occurs. With
the 3262/3267 Modem card, if one modem fails, the ALM
LED lights and remains lit regardless of which modem front
panel is being viewed.
the 3262/3267 Modem card, if one modem fails, the ALM
LED lights and remains lit regardless of which modem front
panel is being viewed.
Table 3-1.
326X LEDs
326X LEDs
LED
Name
Description