ZyXEL Communications P-661HW Series ユーザーズマニュアル

P-661H/HW Series User’s Guide

Chapter 17 Remote Management Configuration

261

TR-069 is a protocol that defines how your ZyXEL Device can be managed via a management 
server such as ZyXEL’s Vantage CNM Access. 

An administrator can use CNM Access to remotely set up the ZyXEL Device, modify settings, 
perform firmware upgrades as well as monitor and diagnose the ZyXEL Device. All you have 
to do is enable the device to be managed by CNM Access and specify the CNM Access IP 
address or domain name and username and password.

Follow the procedure below to configure your ZyXEL Device to be managed by CNM Access. 
See the Command Interpreter appendix for information on the command structure and how to 
access the CLI (Command Line Interface) on the ZyXEL Device. 

Note: In this example a.b.c.d is the IP address of CNM Access. You must change this 

value to reflect your actual management server IP address or domain name. 
See 

for detailed descriptions of the commands.

Figure 149   Enabling TR-069 

The following table gives a description of TR-069 commands. 

ras> wan tr069 load
ras> wan tr069 acsUrl a.b.c.d
Auto-Configuration Server URL: http://a.b.c.d
ras> wan tr069 periodicEnable 1
ras> wan tr069 informInterval 2400
TR069 Informinterval 2400
ras> wan tr069 active 1
ras> wan tr069 save

Table 112   TR-069 Commands

wan

tr069

All TR-069 related commands must be preceded by wan 

tr069.

load

Start configuring TR-069 on your ZyXEL Device.

active [0:no/
1:yes]

Enable/disable TR-069 operation. 

acsUrl <URL>

Set the IP address or domain name of CNM Access. 

username 
[maxlength:15]

Username used to authenticate the device when making a 

connection to CNM Access. This username is set up on 

the server and must be provided by the CNM Access 

administrator.

password 
[maxlength:15]

Password used to authenticate the device when making a 

connection to CNM Access. This password is set up on the 

server and must be provided by the CNM Access 

administrator.